Parts for the watermaster 96

Parts most often needed for the Ritchie watermaster 96 fountains...

PARTS / WATERMASTER 96

ma 250W / 120V Donut Immersion Heater - non coated (SKU: 16311-NC)

16311-NC
Non-Coated - It's best to remove immersion heaters from fountains when chance of freezing is over.

mb 250W / 120V Donut Immersion Heater - coated (SKU: 16311-C)16311-C
This Heater is Covered With a Protective Teflon Coating - But it's still best to remove it from the fountain when chance of freezing weather is over.

oc Water Supply Winterize Kit (SKU: WSWK)

WSWK
Winterizes Water Supply Lines (2-piece kit)

qac 3" Expanding Drain Plug for Watermatics & Watermasters (SKU: 18470)

18470
This is the latest design of drain plug that is used on the Watermatic and Watermaster fountains.

qae #3 Channel Drain Plug for Watermasters (2 per package) (SKU: 18633)

18633
This is the #3 Channel Drain Plug for Watermasters (2 per package)

qai 3" Poly Strainer for Watermasters (SKU: 17194)

17194
This is the Poly Strainer that covers the overflow hole on the south end of a Watermaster fountain.

sca 3/4" Watermatic Float / Valve Assy (SKU: 34WMFVA)

34WMFVA
3/4" 40-60 psi float valve assembly for the Watermatic 300, 1000, Watermaster 54, 54D, 90, 96, 600, 1200, Cattlemaster 480, 840, 1440, 10T and the Thriftyking CT 2 & 4.

scb 3/4" Male White Valve (5-40 psi) (SKU: 16697)

16697
3/4" 40-60 psi white float valve which can be used on any fountain that uses the 3/4" male valve.

scc 3/4" Male Red Valve (40-60 psi) (SKU: 11101)

11101
3/4" 40-60 psi red float valve which can be used on any fountain that uses the 3/4" male valve.

scd 3/4" Male Red Valve w/ 1/8" CF Side Tap (40-60 psi) (SKU: 11142)

11142
3/4" 40-60 psi red float valve with 1/8" constant flow side tap - it could be used on any fountain that uses the 3/4" male valve.

sce 1/8"mpt x 1/4"comp Brass Angle Needle Pitcock Valve (SKU: 11793)

11793
This is the brass 1/8"mpt x 1/4"comp angle needle pitcock valve used with the 11142 side tapped float valve to make the fountain able to heat itself by the "constant flow" method.

scf 3/4" Male Green Valve (60-80 psi) (SKU: 15377)

15377
3/4" 60-80 psi greem float valve which can be used on any fountain that uses the 3/4" male valve.

scg 3/4" Male Blue Valve (80-100 psi) (SKU: 18197)

18197
-Discontinued-
3/4" 80-100 psi blue float valve which can be used on any fountain that uses the 3/4" male valve. Order the new 18832 high pressure valve & float assembly instead.

sda Inlet Pkg For 3/4" Male White Valve (SKU: 18626)

18626
3/4" Inlet Package for the White Male Valve. This piece could be used on the valve found in any of the 3/4" male valved fountians.

sdb Inlet Pkg For 3/4" Male Red Valve (SKU: 18606)

18606
3/4" Inlet Package for the Red Male Valve. This piece could be used on the valve found in any of the 3/4" male valved fountians.

sdc Inlet Pkg For 3/4" Male Green Valve (SKU: 18622)

18622
3/4" Inlet Package for the Green Male Valve. This piece could be used on the valve found in any of the 3/4" male valved fountians.

sfd 3/4" Valve Plunger Pkg with Button, Nose-piece & Gasket (SKU: 15259)

15259
3/4" Valve Plunger Pkg with Button, Nose-piece & Gasket. This is the only way you can purchase the 3/4" valve plunger with rubber button.

sfe 3/4" Valve Nosepiece Gaskets (5 per package) (SKU: 18397)

18397
3/4" Valve nose-piece gaskets (5 per package). Used on 3/4" valves throughout the larger fountains. In the old days, this gasket was not used.

sff 3/4" Valve Rubber Buttons (10 per package) (SKU: 15152)

15152
3/4" Valves have a small rubber "button" in them that makes a seal when the plunger is moved by the float. This button is the heart of the valve and is a "wear & tear" item.

sha Square Bossed Elbowing Float Valve and Constant Flow Heat Valve Assembly (SKU: 16464)

16464
Square Bossed Elbowing Bracket, Float Valve and Constant Flow Heat Valve Assembly. This is termed as a "Watermaster Valve Assembly" by Ritchie.

PARTS / WATERMASTER 96

Shortcuts: