ma 250W / 120V Donut Immersion Heater - non coated16311-NC
Non-Coated - It's best to remove immersion heaters from fountains when chance of freezing is over.
|
|
mb 250W / 120V Donut Immersion Heater - coated16311-C
This Heater is Covered With a Protective Teflon Coating - But it's still best to remove it from the fountain when chance of freezing weather is over.
|
|
na Deluxe Small Fountain Installation KitDSFIK
Installs Watermatics, Ecofounts, Omni 1,2,3, and CT1 with stainless bolts, ball valve, & insulation for lines
|
|
nb Small Fountain Installation KitSFIK
Pipe Insulation Not Included - Order # DWMIK if you need insulation too.
|
|
oa Anchor Bolt Kit Plated SteelABKPS
Plated Steel - Less money, but can eventually rust off - Washers shown, but not included.
|
|
ob Anchor Bolt Kit Stainless SteelABKSS
These "Forever" Wedge Anchors are made of stainless steel - Washers shown, but not included.
|
|
oc Water Supply Winterize KitWSWK
Winterizes Water Supply Lines (2-piece kit)
|
|
pa 3/4 x 1/2 Ball Valve Kit34x12BVK
American Made By The Spears Company
|
|
qaf 2" Silicone Drain Plug (#11) for Thriftykings, some Watermasters18219
This is the 2" Silicone Drain Plug (#11) used on Watermaster 54D, 600, ThriftyKing Fountains - CT's & Hg's.
|
|
rb Ritchie Mini Water Meter18218
Know how much water your animal is consuming. The economical Mini Water Meter installs in the 3/8" rubber hose line of smaller fountains between the water source and the float valve.
|
|
sab 1/2" Male White Valve (5-40 psi)12574
1/2" 5-40 psi float valve which can be used on any fountain that uses the 1/2" valve.
|
|
sac 1/2" Male Red Valve (40-60 psi)12575
1/2" 40-60 psi float valve which can be used on any fountain that uses the 1/2" valve.
|
|
sad 1/2" Male Green Valve (60-80 psi)13597
1/2" 60-80 psi float valve which can be used on any fountain that uses the 1/2" valve.
|
|
sag 1/2" Valve Rubber Buttons (10 per package)15151
1/2" Valves have a small rubber "button" in them that makes a seal when the plunger is moved by the float. This button is the heart of the valve and is a "wear & tear" item (10 per package).
|
|
sag 1/2" Valve Wingnut / Screw / Star-washer Pkg12576
1/2" Valves have a small screw, star-washer, and wingnut that holds the float arm onto the float. It is also where you adjust the float and water level of the fountain. This part is small but necessary.
|
|
sba 1/2" Male Valve and Elbow Pkg for the CT 116899
1/2" float valve and 3/4"mpt x 1/2" fpt elbow (3/4" street ell & 3/4"mpt x 1/2"fpt bushing) which is used in the CT 1 fountain.
|
|
td Plastic Pill-Shaped Float w/ Long Arm12836
Plastic Pill-Shaped Float with Long Arm for Watermatic 100, 150, 150s&g, Ecofounts 1 & 2, Thriftyking CT 1.
|
|
te Long Plastic Float Arms for pill-shaped floats (2 per package)18635
Long Plastic Float Arms (2 per package) used on the Watermatic 100, 150, 150s&g, Ecofounts 1 & 2, Thriftyking CT 1.
|
|
ui Self-limiting heat cable or heat tape - protects the water supply line16276
This is a self limiting heat cable or heat tape which warms up when temperature falls below 38 degrees. I can be used on the water supply of any fountain where power is available.
|
|
vd 3/4"mpt x 3/4"fpt PVC Street Elbow Pkg16388
3/4"mpt x 3/4"fpt PVC Street Elbow Pkg.
|
|